Skip to content
Jet Ski Fenders: Cushion Your PWC From Scratches, Dings and Dents
Do you use fenders on your jet skis? You might be thinking, "Why would I do that?" Or even "What exactly is a jet ski fender?"
I have to admit, I rarely see them in use. After a bit of research, I've discovered that they can pack a lot of protection into a handy little package of nylon and foam. Jet ski fenders are small (sometimes inflatable) devices that fit over the hull of the ski, at the rub rail, to protect it from hitting the dock or another boat.
They're very similar to the boat fenders you see hanging over the side of sportfishing boats and trawlers (but much smaller, of course). Obviously, dock bumpers can serve the same purpose, but they're not always going to be there.
Most jet ski fenders are designed solely for docking. In other words, they won't stay on while you're at speed.
Benefits of Jet Ski Fenders
If you never tie up a line at a dock or moor off of a boat, you might not ever need jet ski fenders. Personally, I enjoy jetting to my local lakeside restaurant, docking the ski and enjoying the waterfront view. This, however, means I run the chance of getting a scratch or two from a closely tied vessel or from a boat wake.
Let's take a look at a few of the benefits of jet ski fenders.
- Prevents scratches and damage due to banging against the dock (during docking the ski or just sitting there)
- Keeps jet ski from scratching a nearby boat that it's moored off
- Protection while strapped on the trailer
Types of Jet Ski Fenders
Available in your search are a couple of different types of jet ski fenders. While slightly different in looks, they work about the same. The main thing with jet ski fenders is that you won't have a cleat to tie the line to (I could be mistaken, but I've never seen a cleat on a jet ski), like on a boat. This is where you get creative and stuff that line under the seat cover.
Hook
The Hook version of a jet ski fender looks sort of like, well, a hook. The bottom hooks under the rub rail of the jet ski. A suction cup and a line keep it securely in place.
Flexible areas with hinges conform to fit the shape of the ski. Hook jet ski fenders usually have an inflation valve for air pressure adjustment. The fact that it's inflatable is an excellent benefit. You can always re-inflate it. When non-inflatable ones go flat, the only thing you can do is purchase a new one.
Hull Hugger
The Hull Hugger has a molded hook in the back that hooks under the rub rail with a hinge in the center for protection and flexibility. The top connects to a cleat or the ski eye with a strap. You can also configure it so the storage compartment closes on the strap to keep it in place.
Classic Bumper
The Classic Bumper is the traditional long cylinder shape that's typically seen on boats of any size. Rather than a suction cup application, they use marine rope for attachment purposes. Since they can be found in a variety of sizes, they make acceptable jet ski fenders as well.
Custom
Sea-Doo has their very own version of a jet ski fender for the Sea-Doo Spark. The Spark is actually designed with holes under the rub rail to snap the fenders into.
If you have a Spark, great. If not, this one's not for you.
Editors Choice
| Boat Fenders |
Check Price on Amazon -
Jet Ski Fenders: Cushion Your PWC From Scratches, Dings and Dents
Airhead SB-4 Boat Fender
Check price on Amazon |
Airhead SB-4 Boat Fender , Black, 3" X 18"
|
- Type: Classic bumper
Hull Hugr PWC Fender
Check price on Amazon |
Hull Hugr PWC Fender, Black (Pack of 3)
|
Made specifically for jet skis, the Hull Hugr PWC Fender has two foam squares connected with a hinged area in the center. This hinge allows some flexibility and protects the ski from the dock or other boats.
There's a molded acetyl hook that secures under the rub rail. The top gets connected to a ski eye with a strap and vinyl hook. Like the bumper listed above, you can also place the strap under the seat cover for a secure hold.
- Type: Hull hugger
Sea-Doo Spark Snap-in Fenders
Check price on Amazon |
Sea-Doo New OEM, High-Visibility Orange Snap-In Fenders Sold In Pairs, 295100418
|
- Type: Customized snap-in for sea-doo spark
Taylor Made 1069 Personal Watercraft Fender
Check price on Amazon |
Taylor Made Products, 1069 Personal Watercraft Fender, White
|
The Taylor Made Products 1069 Fender fits most jet skis that have an open area under the rub rail to hook onto.
Flexible areas conform to the shape of the ski and rub rail. The suction cup and securing line are included. There's an inflation valve to get just the right amount of cushioning. It comes in a couple of colors if you're into aquatic color coordination.
- Type: Hook
Yamaha PWC Fender
Check price on Amazon |
|
- Type: Traditional Bumper
Other Accessories for Jet Skis
While we're on the subject of jet ski scratch and damage protection, let's check out a few other items that can make jet ski life a little bit easier.
Sgt Knots Boat Fender Lines
Check price on Amazon |
|
When using a traditional bumper, you'll need rope to attach it. Sgt Knots twisted three-strand fender line is designed specifically for small fenders. It's made of high-grade nylon that's strong, stretchy and durable, perfect for a marine setting.
All you have to do is thread one end through the eyelet on the fender. Then secure the other end under the seat cover or hood.
Airhead Bungee Dock Line
Check price on Amazon |
AIRHEAD AHDL-4 Bungee Dockline 4 Feet
|
Whether you're tying down a fishing kayak, stowing rods and reels or securing a cooler to the deck, bungee lines are an essential in every boater's bag.
The Airhead Bungee Dock Line takes that universal handiness and combines it with a dock line. At four feet long, it absorbs shock to the ski, the dock and pylons as it keeps the ski at a safe distance. The bungee cord is inside of the nylon rope.
Two foam floats add scratch protection and sliding adjustments at both ends make docking quick and easy. It can hold boats and jet skis up to 4,000 pounds.
Airhead Impeller Protector
Check price on Amazon |
Impeller Protector PWC Shock Tube, 24"
|
When towing with your jet ski (yes, you can tow with a jet ski), you'll want to keep the rope away from the impeller. Nothing ruins a day more than sucking a tow line up into your ski.
The Airhead Impeller Protector is made of nylon with a closed-cell 24-inch foam tube. Just run the rope through the foam protector. This keeps the ski rope away from the impeller so the rope doesn't get sucked up into it. It also protects riders from a rope's kickback.
Airhead PWC Sand Anchor
Check price on Amazon |
Airhead PWC | Shallow Water Sand Anchor
|
One advantage of jet skis is their ability to be used in much more shallow water than a boat (because of that whole no exterior propeller thing). I love to ride up to small islands and explore. All I have to do is pull the ski up onto the sand. Even very shallow water is no problem, but they do still need an anchor to keep from floating away.
The Airhead PWC Sand Anchor is a really cool alternative to a metal boat anchor. It's a durable tri-laminate bag with drawstrings and six feet of line.
Just scoop up sand or rocks and toss it over. The drawstring top keeps it all inside. When you're ready to go, empty it out and fold it up. It's excellent for anchoring in shallow water, and the bright yellow is easy to see.
Featured Boating Product
  |
|
Check Price on Amazon- Better Boat's sand anchor spike is portable and self-hammering to easily secure your jet ski, boat, canoe or kayak. It works great in soft and hard-packed sand and shallow water.
Another easy-to-use anchor for a jet ski is the Better Boat sand anchor spike. The slim and self-hammering spike secures your small boat or jet ski in soft or hard-packed sand. Use on beaches, sand bars and shallow water.
Truth be told, I currently don't have fenders on my jet ski. However, after researching them and discovering how easy and practical they are to use, I think I'll be surfing on over to Amazon to purchase a few.
Hopefully, this has provided you with some advice on the best type of jet ski fender for your PWC. Happy jetting!