Replace a worn trailer coupler with a 2 inch ball coupler sized to your tongue channel.
Choose 2 inch, 2.5 inch, or 3 inch channel width for the trailer you are fitting.
Carbon steel with electro galvanized finish is built for boat trailer and outdoor towing conditions.
Predrilled 0.56 inch mounting holes help simplify bolt on installation.
Adjustable nut and lockable quick release lever help dial in the fit to the trailer ball.
More Details
Fits 2 inch trailer ball size.
Available channel sizes: 2 inch, 2.5 inch, and 3 inch.
2 inch and 2.5 inch channel variants are rated to 3500 lb capacity.
3 inch channel variant is rated to 5000 lb capacity.
Pressed carbon steel with electro galvanized finish and 0.56 inch predrilled bolt holes.
Includes adjustable nut and quick release lockable lever.
Description
Trailer Coupler 2 Inch is a straight tongue replacement coupler for boat and utility trailers that use a 2 inch trailer ball. Select the channel width that matches your trailer tongue: 2 inch, 2.5 inch, or 3 inch.
The pressed carbon steel body has an electro galvanized finish for ramp, rain, road, and storage conditions. Predrilled bolt holes on the top and sides support common trailer tongue layouts, while the adjustable nut and lockable quick release lever help fine tune the connection.
Replace a worn trailer coupler with a 2 inch ball coupler sized to your tongue channel.
Choose 2 inch, 2.5 inch, or 3 inch channel width for the trailer you are fitting.
Carbon steel with electro galvanized finish is built for boat trailer and outdoor towing conditions.
Predrilled 0.56 inch mounting holes help simplify bolt on installation.
Adjustable nut and lockable quick release lever help dial in the fit to the trailer ball.
More Details
Fits 2 inch trailer ball size.
Available channel sizes: 2 inch, 2.5 inch, and 3 inch.
2 inch and 2.5 inch channel variants are rated to 3500 lb capacity.
3 inch channel variant is rated to 5000 lb capacity.
Pressed carbon steel with electro galvanized finish and 0.56 inch predrilled bolt holes.
Includes adjustable nut and quick release lockable lever.
Description
Trailer Coupler 2 Inch is a straight tongue replacement coupler for boat and utility trailers that use a 2 inch trailer ball. Select the channel width that matches your trailer tongue: 2 inch, 2.5 inch, or 3 inch.
The pressed carbon steel body has an electro galvanized finish for ramp, rain, road, and storage conditions. Predrilled bolt holes on the top and sides support common trailer tongue layouts, while the adjustable nut and lockable quick release lever help fine tune the connection.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our trailer coupler 2 inch risk free for 30 days. If you are not satisfied, get a full refund.
Fit and setup
Use only with hitch balls marked with the corresponding 2 inch size and do not exceed the rated load. Install using the predrilled holes. Do not alter the coupler, drill additional holes, or overtighten during attachment.
Adjustable ball tension
The underside of the trailer coupler has a lock nut to adjust and tighten the fit around your trailer ball. Once the coupler is on the ball, put the handle in the downward locked position and adjust so the connection is secure while still allowing the handle to release when disconnecting.
Before towing
Make sure the trailer is level when attached correctly. Regularly inspect and tighten the coupler before each use, inspect for wear or damage, and replace if necessary. Always use backup safety chains when towing, and use a coupler lock or pin on the handle when towing.
Full installation and safety guide
Download the complete Trailer Coupler Installation and Safety Guide (PDF) for step-by-step installation, the pre-trip checklist, troubleshooting, and the full printed warnings for all three channel sizes.
Tow With Confidence
Secure 2 inch ball connection for boat and utility trailers
Marine Grade Durability
Galvanized steel helps resist salt rain snow and road grime
Adjustable Fit
Locking handle and nut help dial in a tight hitch ball connection
Bolt On Setup
Predrilled holes support straightforward trailer tongue installation
Customer Reviews
Frequently Asked Questions
Capacity depends on channel size. The 2-inch Channel and 2.5-inch Channel couplers are rated for 3,500 lbs. The 3-inch Channel coupler is rated for 5,000 lbs. All variants fit a 2-inch trailer ball.
Choose the variant that matches the width of your trailer tongue, not the ball. The 2-inch Channel fits a 2-inch tongue, the 2.5-inch Channel fits a 2.5-inch tongue, and the 3-inch Channel fits a 3-inch tongue. All three fit a 2-inch hitch ball.
No, this coupler is precision-engineered for use only with a 2-inch hitch ball to ensure a safe and secure connection.
Yes, the coupler is made from carbon steel and is electro-galvanized to provide marine-grade protection against corrosion.
Yes, the design includes predrilled locations for both top and side attachment to accommodate various trailer configurations.
No, this unit does not include hardware; you should use high-quality Grade 5 or Grade 8 bolts for installation.
No, there is an adjustable nut located on the underside that can be turned with a standard wrench to tighten or loosen the grip.
Yes, the quick-release lever features a hole that accepts a standard trailer coupler lock or padlock for added security.
Both, depending on the variant. The 2-inch Channel and 2.5-inch Channel are rated 3,500 lbs towing and 500 lbs tongue weight, marked Class II. The 3-inch Channel is rated 5,000 lbs towing and 700 lbs tongue weight, marked Class III. Match the rating to your fully loaded trailer weight and do not exceed it.
