Replace a worn trailer jack wheel so the tongue jack rolls smoothly again.
Fits standard 2 inch trailer jack shafts on compatible boat, camper, car hauler, and utility trailers.
360 degree swivel helps reposition trailers at ramps, driveways, storage lots, and shops.
Spring loaded pin plus side bolt create two retention points on the jack shaft.
Choose 1200 lb single wheel or 2000 lb dual wheel capacity.
More Details
Available variants: 1 wheel 1200 lb and 2 wheels 2000 lb.
Fits 2 inch diameter trailer jack shafts.
3/8 inch pin diameter.
Shaft hole must be within 1 and 3/16 inches from shaft bottom.
Wheel diameter is 5.5 inches.
Single wheel variant has 9 inch overall height.
Solid polymer wheel with welded steel frame and powder coat finish.
Description
Trailer Jack Wheel Replacement slides onto a standard 2 inch trailer jack shaft to restore easier movement at the ramp, driveway, storage lot, or shop. It is made for compatible tongue jacks on boat trailers, campers, car haulers, and utility trailers.
The wheel swivels 360 degrees for repositioning. A spring loaded pin through the shaft hole and a side bolt against the shaft exterior give the wheel two retention points. Choose the 1200 lb single wheel or 2000 lb dual wheel version.
Replace a worn trailer jack wheel so the tongue jack rolls smoothly again.
Fits standard 2 inch trailer jack shafts on compatible boat, camper, car hauler, and utility trailers.
360 degree swivel helps reposition trailers at ramps, driveways, storage lots, and shops.
Spring loaded pin plus side bolt create two retention points on the jack shaft.
Choose 1200 lb single wheel or 2000 lb dual wheel capacity.
More Details
Available variants: 1 wheel 1200 lb and 2 wheels 2000 lb.
Fits 2 inch diameter trailer jack shafts.
3/8 inch pin diameter.
Shaft hole must be within 1 and 3/16 inches from shaft bottom.
Wheel diameter is 5.5 inches.
Single wheel variant has 9 inch overall height.
Solid polymer wheel with welded steel frame and powder coat finish.
Description
Trailer Jack Wheel Replacement slides onto a standard 2 inch trailer jack shaft to restore easier movement at the ramp, driveway, storage lot, or shop. It is made for compatible tongue jacks on boat trailers, campers, car haulers, and utility trailers.
The wheel swivels 360 degrees for repositioning. A spring loaded pin through the shaft hole and a side bolt against the shaft exterior give the wheel two retention points. Choose the 1200 lb single wheel or 2000 lb dual wheel version.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our trailer jack wheel replacement risk free for 30 days. If you are not satisfied, get a full refund.
Fit and capacity
Compatible with 2 inch trailer shafts and includes a securing pin. Use on flat, level ground that can support the load. The single wheel should not exceed 1,200 lb. The two wheel mount should not exceed 2,000 lb.
Before use
Inspect the wheel or wheels and stand before each use to make sure they are free from damage. Replace bent, broken, or worn parts before use. Make sure the locking pin is secured with the jack or stand in the vertical position before applying load.
Use and towing safety
Use wheel chocks and a wheel dock to help prevent the wheels from moving or the trailer from shifting during use. Never move the trailer with a vehicle while the trailer jack is in the vertical position. Before towing, once the trailer is secured to a vehicle, rotate the jack or stand to the horizontal position and lock the pin to keep it in position.
A Foot Pad Digs In. This Rolls to the Hitch.
Swivel Wheel
Bare Foot
Rolls up to the hitch
360 swivel steering
No back-straining lift
Pin + bolt dual retention
Powder-coated to last
Moving the tongue
Roll & steer
Lift & drag
Restore Smooth Rolling
Replacement wheel helps your trailer jack move like it should
Maneuver Easier
Roll the trailer tongue into position with less dragging and strain
Marine Ready Build
Durable construction resists corrosion through ramp and storage use
Fits Common Jacks
Designed for most 2 inch trailer stands and Better Boat jacks
ROLL & SWIVEL
Roll It to the Hitch, No Lifting
Roll the trailer tongue right up to your truck, line it up with the hitch, and crank the jack to drop it onto the ball. The 360 swivel wheel lets you steer and reposition the tongue by hand instead of straining your back lifting and dragging it.
Highlights:
Boat, camper & utility trailers
Fits 2 in jack shafts
360 swivel, solid polymer wheel
1200 lb single or 2000 lb dual
Customer Reviews
Frequently Asked Questions
1 Wheel 1200lbs: A single-wheel replacement assembly. 2 Wheels 2000lbs: A dual-wheel replacement assembly. Both include a securing pin and side bolt for attachment to a compatible trailer jack shaft; a full jack is not included.
Capacity depends on the selected variant. The single-wheel replacement is rated for 1,200 lbs, and the dual-wheel replacement is rated for 2,000 lbs.
This is a replacement wheel that fits standard 2 inch trailer jack shafts and secures with the included pin. It is not a bolt-on jack.
Absolutely. The galvanized coating provides superior corrosion resistance compared to standard painted jacks, making it perfect for marine environments.
This is a replacement wheel for 2-inch trailer jacks, not a full jack. The single-wheel option is rated for 1,200 lbs, and the dual-wheel option is rated for 2,000 lbs.
Yes, it features a pull-pin swivel mechanism that allows you to rotate the jack 90 degrees and lock it in a horizontal position for safe travel.
1 Wheel 1200lbs: Has a 5.5-inch wheel diameter and a 9-inch overall height. 2 Wheels 2000lbs: Has a 5.5-inch wheel diameter. Both fit compatible 2-inch trailer jack shafts and use a 3/8-inch pin; the shaft hole must be within 1 and 3/16 inches of the shaft bottom.
This model features a high-impact, heavy-duty plastic wheel designed for smooth rolling on paved and hard-packed surfaces.
Absolutely. The frame has a corrosion-resistant galvanized finish specifically made to handle marine environments.
This model features a heavy-duty 5.5-inch diameter wheel for smooth rolling and stable support.
It depends on the trailer tongue weight and selected wheel capacity. The single-wheel option is rated for 1,200 lbs, and the dual-wheel option is rated for 2,000 lbs. Use the dual-wheel option for heavier trailers only if your required support capacity is within that rating.
Yes, the securing pin allows you to slide the wheel off in seconds, which is recommended to ensure maximum ground clearance while you are on the road.
