Turns an unused rod holder into a bait station, fish cleaning board, or cockpit work tray.
Keeps knives, pliers, hooks, lures, and bait mess organized in raised tray sections.
Dual adjusting arm works with straight and angled rod holders for better board placement.
Polyethylene surface resists odor absorption, cracking, and peeling after fishing trips.
Removes quickly for cleanup, storage, or moving between compatible rod holders.
More Details
Board measures 18 inches by 14.75 inches.
Inner working area measures 16.75 inches by 8.5 inches.
Made from UV resistant marine grade polyethylene with an aluminum support arm.
Includes 3 tray sections with depths up to 2 inches plus slots for knives, tools, hooks, lures, or accessories.
Includes embedded 40 cm measuring ruler.
Dual adjusting arm has 2 pivot points for straight and angled rod holders.
Description
The Rod Holder Cutting Board adds a usable work surface without drilling a fixed table into the boat. Drop the support arm into a compatible rod holder and use the board for bait prep, fish cleaning, rigging, drinks, or quick cockpit jobs.
The raised tray layout helps keep small tools and messy items from sliding around. The dual adjusting arm gives you placement flexibility on straight or angled rod holders, then the whole board lifts out for washing and storage.
Turns an unused rod holder into a bait station, fish cleaning board, or cockpit work tray.
Keeps knives, pliers, hooks, lures, and bait mess organized in raised tray sections.
Dual adjusting arm works with straight and angled rod holders for better board placement.
Polyethylene surface resists odor absorption, cracking, and peeling after fishing trips.
Removes quickly for cleanup, storage, or moving between compatible rod holders.
More Details
Board measures 18 inches by 14.75 inches.
Inner working area measures 16.75 inches by 8.5 inches.
Made from UV resistant marine grade polyethylene with an aluminum support arm.
Includes 3 tray sections with depths up to 2 inches plus slots for knives, tools, hooks, lures, or accessories.
Includes embedded 40 cm measuring ruler.
Dual adjusting arm has 2 pivot points for straight and angled rod holders.
Description
The Rod Holder Cutting Board adds a usable work surface without drilling a fixed table into the boat. Drop the support arm into a compatible rod holder and use the board for bait prep, fish cleaning, rigging, drinks, or quick cockpit jobs.
The raised tray layout helps keep small tools and messy items from sliding around. The dual adjusting arm gives you placement flexibility on straight or angled rod holders, then the whole board lifts out for washing and storage.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our rod holder boat cutting board for fish and bait risk free for 30 days. If you are not satisfied, get a full refund.
Assembly
Remove the support pole from the box and find the male end closest to the adjustment knobs. Insert the male end of the support pole into the bottom of the table, aligning the small bump inside the female end of the table with one of the two slits on the male end of the support pole. Tighten the screw to secure the support pole to the table.
Install in rod holder
Insert the bottom of the support pole into your rod holder and slide down the securing collar to secure the pole into the rod holder.
Adjust
Loosen the joints counterclockwise to adjust the table to your desired position. Tighten the joints again to secure the position. The support pole includes two different joints so it can be used in an angled or vertical rod holder and adjusted front to back or left to right.
Prep Fish Anywhere
Turns a rod holder into a stable bait and fillet station
Level Work Surface
Dual joint arm adjusts for straight or angled rod holders
Contain The Mess
Built in trays and slots help keep tools bait and liquids organized
Odor Resistant Board
Marine grade surface resists cracking peeling and fish smells
See Why People Love It
Customer Reviews
Frequently Asked Questions
Yes, the dual-jointed aluminum arm is specifically designed to pivot and rotate, allowing you to level the board whether your rod holder is vertical or angled.
No, the board is made from a UV-resistant polyethylene surface that is non-porous and specifically designed not to absorb odors or spills.
The main aluminum arm measures 19.5 inches, providing ample height for comfortable use above the gunwale.
Absolutely, it serves as a multipurpose station that can be used as a bait cutting station, a boat dining table, or even a tackle organization tray.
Yes, the 40 cm ruler is permanently embedded into the work surface, providing a clear and reliable reference for measuring your catch immediately.
