Better Boat Bilge Pump Switch 3 Way product image
Better Boat Bilge Pump Switch 3 Way shown in 02 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 03 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 04 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 05 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 06 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 07 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way product image
Better Boat Bilge Pump Switch 3 Way shown in 02 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 03 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 04 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 05 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 06 BilgePumpSwitch
Better Boat Bilge Pump Switch 3 Way shown in 07 BilgePumpSwitch

Bilge Pump Switch 3 Way

$23.99 $21.99 Save 8%

  • FREE shipping $60+

  • Est Delivery by
    Checking...

  • 30-Day Money Back Guarantee

  • Control your bilge pump from one panel with manual and automatic operation options.
  • Works with a standard float switch or automatic bilge pump setup on 12 volt boat systems.
  • Red and green LED lights help you confirm switch status in low light.
  • Built in resettable 15 amp circuit breaker adds protection for the pump circuit.
  • Instructions, wiring diagram, stainless screws, coated crimp ends, and jumper cord are included.

More Details

  • 3 way bilge pump switch panel for 12 volt boat systems.
  • Manual and auto modes.
  • Red and green LED status lights.
  • Built in resettable 15 amp circuit breaker.
  • Includes stainless steel screws, coated wire crimp ends, jumper cord, instructions, and wiring diagram.

Description

This 3 way bilge pump switch panel gives you a cleaner way to control your bilge pump in manual or automatic mode. It is designed for 12 volt boat systems and can be used with a standard float switch or automatic bilge pump setup.

Red and green LED lights help show switch status, and the resettable 15 amp circuit breaker supports the pump circuit. The kit includes installation hardware, wiring pieces, instructions, and a diagram for setup.

Our Shipping Rates and Speeds

  • All orders under $60 ship for $6.99
  • Orders over $60 ship for FREE
  • You can expect to receive your items in 3 to 7 days in almost all scenarios
  • 90% of orders arrive in 4 days or less

Try our bilge pump switch 3 way risk free for 30 days. If you are not satisfied, get a full refund.

Connect the manual wire of your bilge pump to the MAN marking on the switch panel. If using a Better Boat Bilge Pump, the brown wire is the MAN wire. Connect the positive (+) terminal of the battery to the positive terminal on the switch. Connect the negative (-) wire from the pump to the negative terminal on the switch. If using a Better Boat Bilge Pump, the black wire is the negative wire. Connect the negative (-) terminal of the battery to the negative terminal of the switch.

Use the inner opening as a mounting cut template. Template dimensions are 2.1 inches x 2.2 inches. Total unit dimensions are 2.95 inches x 2.48 inches. Read all instructions carefully before installing and using this product. Keep wire connections above bilge water level and consult a licensed electrician if unsure of installation, wiring, or use.

Tap to enlarge: Bilge pump switch install/template diagram

Control Your Bilge Pump

Switch between manual and automatic modes right from the panel.

Built In Circuit Protection

Resettable breaker helps guard against overloads and pump damage.

Status At A Glance

Bright indicator lights show pump mode during day or night use.

Ready For Wet Panels

Marine components resist splashes, corrosion, and tough installs.

Customer Reviews

Frequently Asked Questions

Yes, it is compatible with any standard 12V bilge pump and float switch system. It works effectively with both manual pumps paired with a separate float or fully automatic internal-switch pumps.

Most boaters can complete the installation in about 30 to 45 minutes using the included template and wiring diagram. The kit provides the necessary screws and crimps to streamline the process.

The panel exterior and rocker switch are designed to be waterproof and withstand splashes and rain. However, the rear wiring connections should be kept in a dry area or protected with heat-shrink tubing.

No, this specific model is designed and rated for 12V marine battery systems only. Using it with higher voltage will damage the LED indicators and internal components.

The green LED illuminates when the system is in "Auto" mode and ready for float switch activation. The red LED lights up when the pump is actively running in "Manual" mode.

You may also like