Lift your boat cover so water, leaves, and debris are less likely to pool in low spots.
Telescoping pole adjusts from 23.5 inches to 56 inches for a custom cover height.
Mushroom style cap and button snap rubber end fit different cover styles.
Aluminum construction gives cover support without making setup complicated.
Choose 1 pack or 2 pack depending on your boat length and cover shape.
More Details
Adjustable height range is 23.5 inches to 56 inches.
Available as 1 pack or 2 pack.
Telescoping aluminum boat cover support pole with twist lock adjustment.
Includes mushroom style cap, snap top, and rubber base.
Designed to help prevent water and debris accumulation on boat covers and tarps.
Compatible with pontoon, jon, bass, and center console boats plus bimini tops.
Description
These boat cover support poles help raise the cover so water, leaves, and debris are less likely to sit in low spots. The telescoping design adjusts from 23.5 inches to 56 inches, letting you set the height that fits your boat and cover.
Each pole includes a mushroom style cap and button snap rubber end to work with different cover styles. Choose a single pole or 2 pack depending on the length of the boat and how much cover support you need.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our telescoping pontoon boat cover and tarp support poles risk free for 30 days. If you are not satisfied, get a full refund.
DIRECTIONS: Insert pole B into base A and push firmly until pole is fully inserted. TO EXTEND POLE Grip pole B then pull joint D up from joint C to expose pole E. Rotate joint D clockwise to lock pole E pole into joint C. Grip joint pole E then pull pole F up until desired height. Rotate pole F clockwise to lock it into joint D. CHOOSE TOP Based on your boat cover type, select either the mushroom cap G or snap top H and place on top of pole F. If desired, you may use straps (not included) to provide additional support to the pole by threading them through the mushroom top. POSITION UNDER BOAT COVER TO COLLAPSE POLE Turn both poles counter-clockwise to release and push in to collapse.
WARNING:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov.
Not Every Prop Keeps The Cover Up
Support Pole
Makeshift Prop
Adjusts to your cover height
Cap spreads load, no cover tears
Wide stabilizing base
Material
Rustproof aluminum
Rusts or rots
Sheds rain, snow, and leaves
Sets up in seconds, no tools
Prevents Water Pooling
Raises the cover so rain and snow shed instead of sagging.
Protects Cover Shape
Reduces stretching, collapse, and stress on stored boat covers.
Helps Stop Mildew
Less standing water means fewer damp pockets over your interior.
Stable Adjustable Support
Wide cap and base help keep the pole upright under the cover.
Rain, snow, leaves, and off-season storage
Give the cover a peak so water runs off
A flat cover lets rain, snow, and leaves pool and tear it. A support pole lifts the cover into a peak, so it all runs off.
Made for:
Pontoon, jon, bass, and center console boats
Bimini tops
Winter storage and the rainy season
Covers and tarps that sag in the middle
See Why People Love It
Customer Reviews
Frequently Asked Questions
With proper storage when not in use, the anodized aluminum construction is designed to last for 5-10 years without rusting or failing.
Yes, these poles are highly effective for large boats, though we recommend using 2-3 poles for covers longer than 20 feet to prevent sagging.
No, the twist-lock mechanism is designed to hold steady under significant weight, and the rubber base prevents the pole from sliding across the deck.
No, the cap is 5 inches wide to spread the pressure across a larger surface area, specifically to prevent tearing or puncturing the fabric.
No, the twist-lock sections are designed for easy gripping and do not require any special tools or extreme strength to secure.
No, the pole is constructed from high-quality aluminum designed to resist rust and corrosion in both fresh and saltwater environments.
The telescoping shaft extends from a compact 23.5 inches up to a maximum height of 56 inches.
Yes, it includes a broad mushroom cap that safely supports any style of boat cover without needing specialized hardware.
Absolutely; the wide base is designed to distribute weight evenly and is made from non-marring materials to prevent damage to your floor.
The internal twist-lock mechanism is heavy-duty; ensure you twist it firmly until it is tight to keep the pole locked at the desired height.
Yes, the aluminum construction makes it very lightweight and easy to handle while still maintaining industrial-strength support.
