Pour a clear high gloss surface for river tables, bar tops, art, castings, and larger craft projects.
Self leveling formula helps bigger pours settle smoother, which means less time fighting uneven spots.
Two part resin and hardener kit gives you enough volume for projects that outgrow small bottles.
UV resistant finish helps completed pieces keep a cleaner look when they see sunlight.
Choose 1 gallon or 2 gallon based on the size of the table, bar top, or casting job.
More Details
Available as a 1 gallon kit or 2 gallon kit.
1 gallon kit package dimensions are 8 by 5 by 5 inches with 9 lb package weight.
2 gallon kit package dimensions are 12 by 12 by 6 inches with 17.7 lb package weight.
Includes epoxy resin and hardener.
Cures crystal clear with a high gloss finish.
Self leveling formula for smoother tabletop pours.
Working time is about 15 to 20 minutes.
Heat resistant to 120 degrees Fahrenheit.
Description
Better Boat Epoxy Resin Table Top Gallon Set is made for larger clear coat and casting projects where a smooth glossy finish is the point. It fits river tables, bar tops, canvas art, jewelry, castings, and encapsulations that need more material than a small kit can cover.
The two part formula cures crystal clear, delivers a high gloss finish, and is designed to self level for a cleaner surface. Select the 1 gallon or 2 gallon kit based on how much resin your project requires.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our clear epoxy resin gallon table kit risk free for 30 days. If you are not satisfied, get a full refund.
STEP 1: DETERMINE AMOUNT NEEDED FOR EACH COAT Use the coverage chart to determine the amount of Epoxy you will need for your project. Ensure you account for the amount needed for the seal coat and surface vertical edges if applicable. STEP 2: PREPARE THE SURFACE AND WORK AREA Work in a clean, dust-free, dry environment with an air tempera- ture between 70°F and 85°F. Lay down plastic sheeting below work table for easy clean up. Only work on a steady and level surface. Ensure the surface to pour Epoxy on is clean and dry. For optimal results, wipe down surface using a clean rag and either acetone or rubbing alcohol. STEP 3: MEASURE RESIN AND HARDENER Measure 1 part Resin to 1 part Hardener by liquid volume or 100 parts Resin to 83 parts Hardener by weight. Pour into a large, clean, dry, smooth-sided mixing cup. Add the Resin to the Hardener for optimal results. STEP 4: MIX HARDENER AND RESIN Mix both parts together for a minimum of 3 minutes. Scrape the sides and bottom of the cup as you mix to ensure that Resin and Hardener are thoroughly mixed. IMPORTANT: When parts are mixed together in a large amount it can generate excessive heat, handle with
Glass Like Finish
Creates a crystal clear, high gloss surface for tables, bars, and art.
Self Leveling Flow
Spreads smoothly to help you get an even finish without special tools.
Hard Clear Coating
Rock hard cure helps protect projects from moisture and daily wear.
Easy One To One Mix
Simple ratio helps beginners and pros pour with less measuring stress.
See Why People Love It
Customer Reviews
Frequently Asked Questions
This epoxy is primarily designed for coating and thin pours (tabletops, bar tops). For very deep pours, it should be applied in multiple layers to prevent overheating.
Once fully cured, the epoxy is generally considered safe for incidental food contact (like a tabletop), but it should not be used for direct food preparation surfaces like cutting boards.
One gallon typically covers approximately 32 square feet at a standard thickness of 1/16 of an inch.
It bonds exceptionally well to wood, glass, and many stones; however, most plastics and polished metals require light sanding to create a mechanical bond for the epoxy to adhere properly.
After pouring, pass a heat gun or small torch about 6 inches above the surface; the heat will thin the resin momentarily, allowing air bubbles to rise and pop.
Yes, once fully cured, it creates a 100% waterproof barrier that is ideal for bar tops and marine-related decorative projects.
