Stake your boat, pontoon, kayak, or PWC at the beach or sandbar without a mallet.
Bungee cord action helps drive the spike deeper through tough ground.
Tapered galvanized steel blade penetrates soft or packed sand for faster setup.
Wide steel tie loop accepts dock line or rope for a simple shoreline tie off.
Included storage bag helps keep wet sand contained when the spike comes back onboard.
More Details
Available in up to 22 foot and up to 30 foot boat size variants.
22 foot version has an orange handle and 40 inch total length.
30 foot version has a green handle and 51 inch total length.
Blade and shaft are hot dipped galvanized steel.
Includes bungee cord system, steel tie loop, rubber grip handle, and storage bag.
Description
The Sand Anchor Spike is made for beach days, sandbars, shallow water stops, and quick shoreline tie offs. Press the tapered blade into the sand, attach your line, and let the bungee cord action help set the spike deeper.
It does not need a screw mechanism, drill, or mallet, which keeps setup simple. The steel tie loop accepts dock line or rope, and the storage bag helps contain wet sand after removal. Choose the 22 foot version for smaller boats or the 30 foot version for larger setups.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our sand spike boat anchor for jet skis and more risk free for 30 days. If you are not satisfied, get a full refund.
To secure vessel
Drive the spike down into the sand. Pull up on the handle and the elastic cord will help pull down, driving the spike further into the sand. Once secure, tie your vessel to the ring on the side of the spike. Optional: if using the spike underwater, attach a buoy to the top ring to alert other boaters to the location of your spike.
To remove spike
Wiggle the spike back and forth to loosen it in the sand. Pull up on the spike while holding below the handle to free it from the sand. Rinse and stow away the spike in the included storage case when not in use.
Keeps boats and PWCs steadier in shallow sand or mud
Bungee Assisted Driver
Bungee Cord to hammer the spike into tough surfaces
Absorbs Wake Shock
Included bungee line helps reduce harsh pulls from waves
Clean Storage
Carry bag helps protect your deck and gear after retrieval
Beach days, sandbars, and shoreline stops
Press it into soft sand, hammer it into hard
In soft sand, press the tapered galvanized blade in by hand. When the ground is packed, the bungee loaded handle works as a built in slide hammer, so you drive the spike down without carrying a mallet. Clip your line to the steel loop, and at the end of the day it lifts out clean and tucks into the included bag so wet sand stays off the deck.
Made for:
Beaches and sandbars
Shallow water and shoreline stops
Boats, pontoons, kayaks, and PWCs
Soft sand or hard packed ground
See Why People Love It
Customer Reviews
Frequently Asked Questions
Sand Anchor Spike 30FT: Yes, the set includes a padded storage bag to protect your boat's interior and gelcoat from the metal spike when it's not being used. Sand Anchor Spike 22FT: Yes, the set includes a storage bag to protect your boat's interior and gelcoat from the metal spike when it is not being used.
No, the spike is made from hot-dipped galvanized steel specifically designed to resist corrosion and rust in harsh marine environments.
Sand Anchor Spike 30FT: The kit includes a 30-foot marine-grade rope, giving you ample length to secure your boat in various shallow water depths. Sand Anchor Spike 22FT: The handle is 12 3/8 inches long with a 1 3/4-inch width, and the blade is 18 inches long with a 1 3/8-inch width.
Yes, the rope features an integrated bungee section designed to absorb shock from waves and wake, preventing the anchor from pulling out.
Yes. The sand anchor spike can work for pontoons, motorboats, and PWCs in sand or mud. Choose the correct version for your boat: one version is rated for boats up to 22 ft, and the larger version is rated for boats up to 30 ft.
The ergonomic T-handle allows you to use your body weight to twist the spike into the ground, providing much more leverage than a standard straight pin.
No tools are needed; the spike features a built-in self-hammering tubular handle that drives the 18-inch blade into the ground for you.
