Boat Ratchet Straps Review, Sizes and How to Use Them
At a glance
Boat ratchet straps tighten webbing to hold a boat to its trailer. Retractable ones wind unused strap into the housing. Choose by working load and trailer layout, tighten until snug, and follow the boat, trailer and strap instructions.
Retractable straps pull extra webbing back into the housing, so no loose tails.
Plan around working load, not breaking strength.
Snug is the goal, and recheck after the first stretch of road.
Boat ratchet straps are tie down straps with a ratchet that tightens webbing to hold a boat, jet ski or other watercraft to its trailer. The retractable kind pull the extra strap back into the housing, so there are no loose tails to flap on the road or tangle at the ramp. The video above shows Better Boat Ratchet Straps in use, and the sections below cover how they work, how to choose a size and how to use them.
What the Video Shows
NexGen Marine & Outdoors Media restores a drift boat in this video and features Better Boat Ratchet Straps along the way. This page is a guide to the straps themselves. For the full drift boat restoration, watch the video. The sections below explain what the straps are, how to size them and how to use them on a trailer.
What Are Boat Ratchet Straps?
Retractable tie down ratchet detail
A ratchet strap uses a geared handle to take up slack in the webbing and lock it under tension. Marine ratchet straps secure a boat to compatible trailer tie down points. Route the hooks and webbing according to the boat, trailer and strap manufacturers' instructions. Rubber coated hooks help protect contact points.
A standard ratchet strap leaves a long tail of loose webbing after it is tight. A retractable design winds that unused webbing back into the housing, which keeps the trailer tidy and keeps the strap from dragging.
Better Boat Retractable Boat Ratchet Straps
The straps in the video are the retractable ratchet straps from Better Boat. Each set includes 2 straps, and the listing also includes optional mounting arms and 4 sets of stainless bolts, washers and lock nuts for a trailer ready setup.
Choosing the Right Size and Load Rating
Two sizes are available. Pick the width and length that match your trailer tie down layout. Working load and breaking strength are different numbers, and the working load is the one to plan around. A tie down is a whole system, so the right straps depend on the boat, the trailer, the attachment points and the instructions for each tie down position, not on one strap rating compared with boat weight.
Size Options and Specs
Options to choose from
1 inch by 72 inch. Rated 500 lb working load and 1500 lb breaking strength, for longer reaches.
2 inch by 43 inch. Rated 600 lb working load and 1800 lb breaking strength, for wider webbing.
Trailer layouts that need the longer 72 inch strap
2 inch by 43 inch
600 lb
1800 lb
Trailer layouts that suit a wider, shorter strap
Both options use polyester webbing, black retracting ratchet housings and rubber coated hooks, and each set includes 2 straps. Follow the boat, trailer and strap manufacturers' instructions for each tie down position, and your state's road laws, to decide how many straps you need and where they go.
How to Use and Thread a Boat Tie Down Strap
Straps securing the boat bow
The retractable straps from Better Boat dispense webbing from their housing and wind the unused strap back in, so they are not threaded like a conventional ratchet strap. Operate them as the instructions included with the straps describe. The general routine looks like this.
Thread and Tighten a Strap
1Hook onAttach the hook to a compatible tie down point on the boat.
2Pull out the webbingDraw the webbing out of the housing as far as the tie down point needs.
3TightenWork the ratchet handle until the boat is held snug.
4ReleaseOpen the ratchet to let the strap go slack and retract.
The basic order for the retractable straps.
Mount the strap housing at a point suited to the layout, using the included hardware if you are installing the set.
Pull out the webbing and attach the rubber coated hook to a compatible tie down point on the boat.
Work the ratchet handle until the strap is snug and the boat is held firmly.
Check that the webbing lies flat with no twists and that the hook is fully seated.
To release, open the ratchet as the instructions describe, unhook, and let the unused strap retract into the housing.
Snug is the goal. Over tightening can stress the boat, the hooks and the tie down points, so stop once the boat is held without shifting.
A conventional, nonretractable ratchet strap works differently. The free end of the webbing is fed through the slot in the ratchet spool, the slack is pulled out by hand, and the handle is then worked to tighten. That threading step does not apply to the retractable straps above.
Tying Down a Boat on a Trailer
Boat secured on its trailer
Ratchet straps are one part of a full tie down. Most setups also include a bow connection to the winch and transom tie downs at the back. Recheck the straps after the first stretch of road. For a full walkthrough, see Best Way to Tie Down a Boat on a Trailer, and for storage ideas see How to Organize Boat Trailer Straps.
Better Boat pick
Boat Trailer Hand Crank Winch
Hand crank trailer winch in 1600 lb, 2000 lb or 3200 lb capacity. Comes with a pre rolled 33 foot strap and hook, mounting hardware and instructions.
If you want a buckle style transom strap instead of a ratchet, Boat Trailer Transom Tie Down Straps are 2 inch nylon straps with a quick release buckle that adjust up to 48 inches. Their listing states a 400 lb working load limit and 1200 lb breaking strength.
If your bow winch uses a strap, inspect it for wear and replace it with a compatible strap when needed. The Trailer Winch Strap Replacement is a 2 inch by 20 foot woven polyester strap with a sewn on hook, offered in 5000 lb and 10000 lb break strength. If the whole winch is worn, the Boat Trailer Hand Crank Winch comes with a 33 foot strap and hook and is offered in 1600, 2000 and 3200 lb capacities.
Caring for Your Straps
Inspect webbing before each trip for fraying, cuts or damaged hooks, and replace any strap that looks questionable. Rinse and dry straps after use, and follow the maker's care guidance. More straps from Better Boat are covered in the Boat Straps Video Review.
What are the best ratchet straps for a boat trailer?
Look for straps made for watercraft, with hooks that protect contact points and a length and width that fit your trailer layout. Check that the working load meets the boat, trailer and strap manufacturers' instructions for each tie down position. Retractable boat ratchet straps keep loose tails out of the way at the ramp.
Are marine ratchet straps different from regular ratchet straps?
Marine ratchet straps are sold for boats and trailers. The Better Boat listing names rubber coated hooks and stainless bolt sets. Always check the label for the working load before use.
How do you thread a boat tie down strap?
The retractable Better Boat straps pull webbing out of the housing and are operated by the instructions included with them. Only a conventional, nonretractable ratchet strap is threaded by feeding the free end through the slot in the ratchet spool, pulling out the slack and then working the handle.
How tight should boat tie down straps be?
Snug enough that the boat does not shift, without straining the hull, hooks or tie down points. Recheck after the first part of the drive.
How many ratchet straps do I need for a boat trailer?
It depends on the boat, trailer and tie down points. Follow the boat, trailer and strap manufacturers' instructions and your state's road laws.
Quick quiz
Tap a question to see the answer.
What does a retractable ratchet strap do with the unused webbing?