Cut heavy oxidation on dull faded fiberglass and gelcoat before you move to polishing.
Step one in the Better Boat compound and polish process for surfaces that need real correction.
Designed to remove 600 and 800 grit wet sanding scratches.
Apply by hand or with a buffer depending on the surface and job size.
Use before polishing compound when the boat needs more than a simple shine product.
More Details
32 oz marine rubbing compound for fiberglass and gelcoat restoration.
Designed for heavy oxidation.
Can be applied by hand or with a buffer.
Designed for removal of 600 and 800 grit wet sanding scratches.
Long open time helps the compound stay wet during use.
Intended as the first step before Better Boat Polishing Compound and optional Marine Polish.
Description
Better Boat Marine Boat Rubbing Compound is for the harder correction work that comes before final shine. Use it on dull faded fiberglass or gelcoat when oxidation is too heavy for a simple polish.
Use it as step one in a multi step restoration process, followed by polishing compound and optional marine polish. Apply by hand or with a buffer based on the surface and the level of correction needed.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our marine boat rubbing compound risk free for 30 days. If you are not satisfied, get a full refund.
APPLICATION INSTRUCTIONS: Read all warnings in their entirety, prior to beginning. Next you will begin preparing your surface, ensuring it is clean and free of dirt. Before starting, shake the compound bottle well and ensure you have a number of clean cloths. Apply the polish in a modest quantity, working it into the surface with a clean cloth through overlapping circular motions in small sections. Continue to apply and buff rigorously as needed, switching out the cloth often to achieve a pristine shine. Ensure excess product is removed post-buffing. For machine buffing, employ a wool or foam compounding pad at a moderate speed between 1400-2000 RPM, focusing on one section at a time approximately 2' x 2'. To minimize compound slinging, apply the compound in an X pattern using a chip brush on the targeted area. Start the compounder with light pressure and gradually reduce the pressure further as the material dries, polishing the surface. Persistently work through each section until all sanding and swirl marks are eliminated ensuring you are swapping out your buffing pads regularly to maintain a consistent finish and prevent hazing. Avoid application in direct sunlight and promptly remove any spatter with a damp cloth. For a high shine and to achieve a high gloss, follow up with our Better Boat Polishing Compound.
Wax Smears Over Oxidation. Compound Cuts It.
Rubbing Compound
Wax Alone
Cuts heavy oxidation
Removes scratches & stains
Restores color & gloss
Erases weathering & haze
Preps for polish & wax
On chalky gelcoat
Cuts it clean
Smears over it
Cuts Heavy Oxidation
Revives faded fiberglass and painted surfaces with deep correction.
Restores Color And Shine
Helps bring dull gelcoat back toward a cleaner, brighter finish.
Longer Working Time
Stays wet during buffing to support smoother, easier application.
First Step Restoration
Preps neglected surfaces for follow up polishing and final protection.
HEAVY OXIDATION
Wax Can't Fix a Chalky Hull
When fiberglass and gelcoat go chalky and faded, wax and polish just smear over the dead oxidized layer. Rubbing compound cuts that layer away by hand or buffer to pull back the original color and gloss, then you follow with polish and wax to seal the shine.
Highlights:
Heavy oxidation on fiberglass & gelcoat
Also removes scratches, stains & weathering
By hand or with a buffer
Step 1: compound, then polish, then wax
Customer Reviews
Frequently Asked Questions
Yes, this fiberglass rubbing compound is expertly designed to eradicate 600/800 grit wet sanding scratches and other surface imperfections.
Yes, it is a highly effective faded paint restorer that revitalizes tired surfaces to bring back their original depth of color.
You can apply it effortlessly either by hand or with a machine buffer, depending on the size of the project and the level of restoration needed.
No, the formula features a long open time, meaning it stays wet during use to ensure a hassle-free and efficient application.
Yes, it is specifically formulated as a professional-grade gel coat restorer and is safe for use on all standard marine fiberglass surfaces.
