Cut and seal synthetic rope in one step instead of chasing frayed ends with a lighter.
Heated 1.5 inch blade reaches up to 1000 degrees Fahrenheit for fast cuts through synthetic materials.
Trigger handle gives you better control for straighter cuts and cleaner line ends.
Use it on nylon, polyester, plastic, synthetic rope, straps, and fabric ribbon.
Keep it in the shop or dock box so every rope cut finishes sealed and ready to use.
More Details
Heated hot knife rope cutter for synthetic materials.
Cuts and seals polyester, nylon, plastic, synthetic rope, straps, and fabric ribbon.
1.5 inch blade.
Peak temperature is 1000 degrees Fahrenheit.
Trigger pull handle for controlled cutting.
Description
Better Boat Hot Knife Rope Cutter helps you cut synthetic rope and seal the end in one step. It is made for nylon, polyester, plastic, synthetic line, straps, and similar materials where fraying turns a clean job into a mess.
The 1.5 inch heated blade warms quickly and the trigger handle gives you control through the cut. Use it in the shop, garage, boat shed, or dock box when you want rope ends finished cleanly.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our hot knife cutter for rope, plastic, nylon, and more risk free for 30 days. If you are not satisfied, get a full refund.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
SAFETY INSTRUCTIONS: 1. This tool has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, the plug is designed to fit in a polarized outlet one way only. Reverse the plug if it does not fit fully in the outlet. If the plug still does not fit, try another outlet. Do not modify the plug in any way. 2. Have a clear space on your work station to rest the rope cutter gun where the blade tip will not come in contact with anything flammable, your body, or the power cord. With a peak temperature of about 1000° Fahrenheit, the blade tip may remain hot for a few minutes after use. 3. To reduce the risk of burns to yourself and others, remove excess residue left on blades after use with a damp cloth or sponge. 4. To reduce the risk of burns to yourself and others, never swing the gun around by the cord. 5. To protect eyes, wear safety goggles meeting requirements of ANSI Z87.1. 6. To reduce the risk of respiratory, eye, or skin irritation, keep your head away from any fumes generated by cutting items. 7. To reduce the risk of electrical shock, fire, or explosion, work only in settings that are dry and free from flammable substances and materials, including vapors and liquids. 8. After use, unplug the power cord and allow the tool to cool. Store the rope cutting gun in a secure place, out of the reach of children.
ASSEMBLY INSTRUCTIONS: 1. With a #2 Phillips screwdriver, loosen the screws located on the side of the rope cutting gun. 2. Insert the included 1.5 inch blade tip into the opening and tighten the screws.
DIRECTIONS: 1. Always ensure that the screws holding the blade tip are snug for the rope cutting gun to function properly. Tighten the screws with a #2 Phillips screwdriver when necessary, taking care to not over tighten and to avoid stripping the screws. 2. Clean the item to be cut if needed. The item should be free of oil and grease. WARNING: To reduce the risk of fire, burns, or toxic vapors, do not use solvents other than alcohol for oil and grease removal. 3. Plug the rope cutting gun into an electrical outlet. 4. Grip the gun handle and apply the rope cutting gun blade tip to the rope or material to be cut. 5. Pull the trigger handle to apply heat. It takes approximately 5 seconds for the blade tip to heat. 6. Release the trigger handle and set the rope cutting gun in a safe place to cool.
IMPORTANT: Never use continuously for more than 1 minute without allowing it to cool for 4 minutes. Never tie down the trigger expecting it to remain at peak temperature, as this will damage the tip and blades. This tool is designed to be used for quick clean cuts.
HOW TO CHANGE THE BLADES: 1. Remove the tip after loosening both screws holding the tip. 2. Insert the new tip and tighten the screws. To avoid stripping the screws, do not over tighten.
MAINTENANCE: WARNING: To avoid burns or electrical shock, always unplug the rope cutter gun and allow it to cool completely before servicing. Keep the blade tip screws snug and periodically inspect them for looseness, tightening when necessary. Keep the tip clean using steel wool or very fine sandpaper.
Cuts And Seals
Slices synthetic rope while sealing the ends to help stop fraying.
Ready In Seconds
Fast heating blade helps you finish line work without waiting around.
Cleaner Rope Ends
Gives nylon, polyester, and plastic cords a neat finished edge.
Controlled Trigger Grip
Comfortable handle helps guide precise cuts on boat and garage projects.
Customer Reviews
Frequently Asked Questions
Yes, the high heat of the blade melts the synthetic fibers as you cut, creating a permanent seal that prevents the rope from fraying or unraveling.
No, this model is designed for 120V AC only and is not dual voltage, making it suitable for standard North American power outlets.
The tool is designed for rapid use and reaches its maximum operating temperature of 1000° Fahrenheit in just a few seconds.
No, hot knives are designed specifically for synthetic materials like nylon and polyester that melt; natural fibers will char rather than seal.
Yes. Loosen the two screws on the side of the gun with a #2 Phillips screwdriver to remove and replace the 1.5 inch blade tip.
The tool weighs 1.8 pounds, providing enough weight for steady, controlled cuts while remaining comfortable for most users.
