Protect the dock contact points that take the abuse: edges, posts, slips, and corners.
High density closed cell foam keeps its bumper shape without needing inflation.
Tri laminate vinyl and polyester cover, thermal bonded seams, and grommets are built for dock exposure.
Angled ends help wrap inside slip corners for cleaner edge protection.
Choose 36 inch, 48 inch, 59 inch, or corner bumper based on your dock layout.
More Details
Available variants are 36 inch, 48 inch, 59 inch, and corner.
Straight dock bumpers are 6 inches wide by 4 inches deep.
Corner piece wraps 90 degree turns and slip entries.
Made with high density closed cell foam.
Covered in tri laminate UV resistant vinyl with polyester backing.
Includes stainless steel screws and washers for installation.
Description
These dock bumpers and corner guards are made to protect the places where boats and personal watercraft make contact with the dock. Use them on edges, posts, slips, and corners to add a forgiving buffer between the hull and hard dock surfaces.
The high density closed cell foam does not need inflation, and the vinyl and polyester cover includes thermal bonded seams. Installation hardware is included so you can choose the length or corner piece that fits your dock layout.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our boat dock bumpers and corner dock bumper guards risk free for 30 days. If you are not satisfied, get a full refund.
Use
Install dock bumpers on dock edges, corners, or other contact points where your boat or PWC may rub or bump. Position the bumper so it protects the hull at the height where contact is most likely.
Care
Inspect periodically for wear, damage, and secure attachment. Replace if damaged.
WARNING:
This product can expose you to chemicals including di-2-ethylhexyl phthalate which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Absorbs Dock Impact
Foam cushioning helps prevent dents, scratches, and harsh contact.
Protects Dock And Boat
Creates a softer barrier along edges, slips, corners, and posts.
Will Not Deflate
Closed cell foam keeps cushioning without air valves or pressure checks.
Made For Sun Exposure
UV resistant cover helps fight fading, tearing, and outdoor wear.
Customer Reviews
Frequently Asked Questions
This listing has separate variants for 36 inch, 48 inch, 59 inch, and Corner dock bumpers. Each dock bumper includes enough screws for every grommet on the selected bumper size. If any screws are missing when your order arrives, contact Better Boat support and we will gladly send replacement screws.
Yes. The straight dock bumper variants can be mounted vertically on posts or pilings, or horizontally along dock edges. Choose the 36-inch, 48-inch, or 59-inch length based on the area you need to protect; the Corner variant is shaped for corner protection.
No, this bumper uses high-density closed-cell foam, which is moisture-resistant and will not absorb water or lose its shape over time.
Absolutely; they are highly effective on both fixed and floating docks, providing consistent protection regardless of the water level.
The tri-laminate cover is UV-stabilized and designed to withstand high temperatures without becoming tacky or losing its protective properties.
Dock Bumper 48: Yes, the 4-foot length provides excellent coverage for pontoons and larger motorboats, especially when mounted horizontally along the dock edge. Dock Bumper 48: We do not recommend cutting the bumper, as it would break the waterproof seal of the tri-laminate cover and expose the foam core. Dock Bumper 59: Yes, its extra-long 5-foot length and industrial-grade construction make it an excellent choice for both residential and commercial dock applications.
Absolutely; the tri-laminate cover and stainless steel grommets are specifically designed to resist the corrosive effects of saltwater.
No, the high-density closed-cell foam is engineered to absorb shock and immediately return to its original shape without deflating or collapsing.
The grommets are reinforced into the tri-laminate fabric on both ends, allowing you to bolt the bumper directly to the dock for a stationary, high-strength fit.
Yes. The straight 36-inch, 48-inch, and 59-inch bumper variants can be mounted vertically on dock posts or pilings to help protect your boat as water levels change. The Corner variant is intended for corner protection rather than a straight piling run.
No, the bumper uses high-density closed-cell foam which is specifically designed to be moisture-resistant and will not absorb water.
A simple rinse with fresh water and mild soap is sufficient to keep the tri-laminate cover looking new and free of marine buildup.
Absolutely; the design is optimized for both horizontal and vertical placement to suit various dock configurations.
No, the bumper features corrosion-resistant grommets that reinforce the mounting points for long-lasting durability.
Yes, the marine-grade construction is non-marring and designed to provide tough protection without scratching your gelcoat.
