Recover worn trailer bunks before bare wood or tired carpet grinds against the hull at every launch.
1/4 inch thick black carpet cushions bunk boards during loading, launching, storage, and transport.
Each roll is 13 feet long, with 9 inch and 12 inch widths for different bunk boards.
Choose 1 pack or 2 pack options based on how many bunks need fresh carpet.
Included glue spreader helps with lining up, cutting, gluing, and stapling the install.
More Details
Available variants: 9 inch by 13 foot 1 pack, 9 inch by 13 foot 2 pack, 12 inch by 13 foot 1 pack, and 12 inch by 13 foot 2 pack.
Each roll is 13 feet long and covers a full pair of 6 foot trailer bunks with material to spare.
Available widths fit 2x4, 2x6, or 2x8 bunk boards.
Black trailer bunk carpet.
Thickness: 1/4 inch.
25 oz marine boat bunk carpet.
Glue spreader included.
Designed for bunk boards and trailer runners.
UV resistant and waterproof material.
Description
Worn bunk carpet can turn every launch and load into extra rubbing on the hull. Better Boat bunk carpet gives trailer boards a fresh black surface in 13 foot rolls sized for common bunk widths.
Choose 9 inch or 12 inch width and 1 pack or 2 pack based on the trailer. The carpet is 1/4 inch thick and includes a glue spreader to support a cleaner install before stapling.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our boat trailer bunk carpet for bumpers risk free for 30 days. If you are not satisfied, get a full refund.
Installation instructions
Gather the necessary materials: bunk carpet, adhesive such as marine sealant, scissors or utility knife, staple gun if desired, measuring tape, and a marker or pencil.
Prepare and cut
Remove any existing carpet or padding from the bunks. Make sure the bunks are clean, dry, and free of debris. Sand rough areas or repair damaged sections if needed. Measure the length and width of each bunk, allowing extra length to wrap around the edges. Mark the measurements on the backside of the carpet and cut along the marked lines.
Apply and secure
Apply a generous amount of adhesive to the bunk surface, spreading it evenly over the entire area where the carpet will be placed. Carefully lay the cut carpet onto the adhesive from one end, smoothing it out to avoid wrinkles or air bubbles. Press firmly for proper adhesion. If desired, use a staple gun to secure the edges at regular intervals.
Dry and maintain
Allow the adhesive enough time to dry. This may take several hours or days depending on the adhesive and weather conditions. Once completely dry, the bunk carpet installation is complete. Keep the carpet clean and periodically inspect it for signs of wear or damage.
Soft bunk carpet helps prevent scratches during loading.
Marine Grade Durability
UV resistant polyester stands up to sun and water exposure.
Thicker Bunk Protection
25 oz carpet cushions bunks through loading and storage.
Cut To Fit
Flexible carpet trims easily for bunks, bumpers, and repairs.
See Why People Love It
Customer Reviews
Frequently Asked Questions
12" Bunk Carpet: No, this listing is for the roll of carpet only. We recommend using stainless steel staples or a high-quality marine-grade adhesive to secure the carpet to your boards for the best results. Bunk Carpet 12in 2pk: This specific product is a 2-pack, meaning you receive two individual rolls of carpet. Bunk Carpet 12in 2pk: No, this 2-pack includes the carpet rolls only; you will need to provide your own marine adhesive or stainless steel staples. 9" Bunk Carpet: This specific roll of Better Boat Trailer Bunk Carpet is 13 feet long and 9 inches wide. Bunk Carpet 9in 2pk: This product is sold as a 2-pack, providing two individual rolls of 9-inch wide carpet for your trailer maintenance.
Yes, the 12-inch width provides more than enough material to wrap fully around standard 2x4 and 2x6 boards. This ensures that every side of the wood is covered to protect your boat hull.
12" Bunk Carpet: You can expect this marine-grade carpet to last 3-5 seasons depending on how often you launch and your sun exposure. The UV-resistant polyester is specifically designed to prevent the fibers from becoming brittle or fading. Bunk Carpet 12in 2pk: This is a heavy-duty 25oz carpet, which is significantly thicker and more durable than the standard 16oz or 20oz options typically found in retail stores. 9" Bunk Carpet: Yes, the 9-inch width is wide enough to wrap around the top and sides of standard 2x4 and 2x6 bunk boards for full protection. Bunk Carpet 9in 2pk: Yes, 9 inches is the standard width used to wrap around the top and sides of common 2x4 and 2x6 bunks, leaving enough material for stapling on the underside.
Yes, the soft polyester surface is safe for all hull types, including fiberglass, gelcoat, and aluminum. It is designed to be non-abrasive while providing enough grip to keep the boat stable on the trailer.
Yes, this flexible material is excellent for padding fenders, guide-ons, and bumpers. You can easily cut it to any size with standard utility shears to fit various parts of your trailer.
Yes, it is made from marine-grade materials specifically designed to resist the corrosive effects of saltwater and intense UV rays.
The polyester fibers are designed to be weather-resistant and shed water quickly to help the underlying wood dry and prevent rot.
Most boaters use stainless steel staples or a high-quality marine-grade adhesive to secure the carpet to the underside of the bunks.
No, it features a heavy-duty marine backing designed for durability and grip, but it requires staples or glue for permanent installation.
This carpet is designed with a low-pile construction to minimize the chance of fishing hooks or debris getting snagged in the fibers.
Absolutely; the 100% PET fiber is designed for marine use and is highly resistant to the corrosive effects of salt and freshwater.
This carpet features a heavy-duty, weather-resistant backing designed to provide durability and stability without trapping moisture against the wood.
The non-woven, high-density fiber is designed to shed water quickly, which reduces the moisture retention that typically leads to mold and mildew.
You will typically need a utility knife for trimming and a heavy-duty stapler with stainless steel staples to secure the carpet to the wood.
