Replace a worn trailer winch with a manual hand crank matched to your boat, jet ski, or watercraft load.
Choose 1600 lb, 2000 lb, or 3200 lb capacity based on your trailer setup.
Each winch comes pre rolled with a 33 foot strap and hook.
Included bolts, washers, lock nuts, and instructions help simplify installation.
Soft rubber grip and coated black winch body are ready for repeated trailer use.
More Details
Available capacities: 1600 lb, 2000 lb, and 3200 lb variants.
1600 lb variant has one speed 4 to 1 gear ratio.
2000 lb variant has 4 to 1 and 8 to 1 gear ratios.
3200 lb variant has 4 to 1 and 8 to 1 gear ratios.
Includes 33 foot boat trailer winch strap with hook.
Includes bolts, washers, lock nuts, and detailed instructions.
Hand crank includes soft rubber grip.
Electrophoretic coating stated for corrosion resistance.
Black color.
Description
A trailer winch should match the boat and the ramp routine. Better Boat trailer winches are available in 1600 lb, 2000 lb, and 3200 lb capacities for boats, jet skis, and watercraft trailers.
Each winch includes a 33 foot strap with hook, mounting hardware, and instructions. Check your load and trailer setup before choosing the capacity and gear configuration.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our boat trailer winch risk free for 30 days. If you are not satisfied, get a full refund.
This winch is exclusively designed for manual operation and has a load rating based on an intermittent duty cycle. This winch is intended for use specifically on watercraft trailers. If excessive force is required to turn the winch handle, it may indicate overloading. If you cannot crank the winch with one hand, you may be exceeding its capacity. Remember that winches are not designed for securing boats to trailers during towing. Use appropriate boat tie downs for this purpose. Under no circumstances should you rely on the ratchet pawl system to support the load while it is being released. Regularly inspect the mounting hardware to ensure it is properly tightened, and tighten if necessary. Prior to use, replace any bent, broken, or worn parts to maintain the product's safety and functionality. MOUNTING INSTRUCTIONS The winch is designed to be attached to a mounting plate or structure capable of supporting at least 5 times the load that the winch will be pulling. The mounting location and hardware must adequately support both your Winch and the load. Use three bolts, along with their corresponding nuts, and washers. Secure the winch to the mounting structure by attaching the bolts through the outermost holes or slots. The third bolt should be inserted through the winch frame and mounting structure, ensuring it utilizes the foremost remaining frame hole. The winch is designed to pull the load in line with the base and not at an angle. The winch may wrap the strap over or under the drum. Attach the handle onto the flattened input shaft end and tighten the included locknut. Do not remove or loosen any of the other locknuts. For two speed models select the desired resistance and tighten the bolt on the desired choice. The bolt closer to the drum is a 4:1 winding ratio while the bolt further away is an 8:1 ratio.
WARNING:
This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
A Worn Winch Slips and Seizes. This Cranks Smooth.
Trailer Winch
Worn Winch
Corrosion-resistant coating
Smooth, non-slip gears
Two-speed 8:1 option
Fresh 33 ft strap & hook
Soft comfort grip
On the ramp
Cranks smooth
Grinds & slips
Load With Less Strain
Two speed winch helps pull boats and gear onto trailers.
Choose Speed Or Torque
Switch gears for faster cranking or heavier pulls.
Corrosion Resistant Pull
Zinc plated steel stands up to marine trailer use.
Long Strap Reach
Heavy duty strap gives extra reach for tricky ramp angles.
CRANK IT ON
Winch the Boat Snug to the Trailer
Clip the hook to your bow eye and crank to pull the boat up the bunks and hold it tight for the road. It comes pre-rolled with a 33 ft strap, and the 2000 and 3200 lb models add a low 8 to 1 gear for easy cranking under heavy loads.
Made for:
Boats, jet skis & watercraft
1600, 2000 or 3200 lb capacity
33 ft strap & hook included
Bolts & hardware included
See Why People Love It
Customer Reviews
Frequently Asked Questions
Yes, each winch includes a complete mounting kit with bolts, washers, and lock nuts for a hassle-free installation.
Two-speed models use a 4:1 ratio for faster retrieval under light load and an 8:1 ratio for more pulling power under heavy load, per the owners manual.
No, the winch is constructed from zinc-plated steel, which is specifically designed to resist corrosion and rust in both fresh and saltwater.
Trailer Winch 2000lbs: This model includes an extra-long 33-foot heavy-duty polyester strap, providing more reach than standard 20 or 26-foot options. Trailer Winch 1600lbs: The pre-installed marine-grade strap is 33 feet long, providing ample reach for most boat trailers.
Yes, the winch features a 2-way ratcheting mechanism that allows for controlled movement in both directions.
The winch is equipped with a soft rubber grip handle designed to provide superior comfort and a non-slip hold during high-torque winching. Absolutely, it features a soft-rubber ergonomic grip designed to be comfortable and slip-resistant even when your hands are wet.
Maximum pulling capacity depends on the selected model: 1,600 lbs, 2,000 lbs, or 3,200 lbs. Choose the winch capacity that matches your trailer and load requirements.
This model offers a higher pulling capacity and features a powerful 2-speed gear system (4:1 and 8:1) specifically for moving larger, heavier vessels.
Yes, it comes with a pre-installed 33-foot heavy-duty polyester strap and a forged steel safety hook.
It allows you to shift gears based on the load: use the 4:1 ratio for speed and the 8:1 ratio for maximum torque when the boat is being pulled out of the water.
Yes, the handle features a soft rubber ergonomic grip designed to stay secure and comfortable even in wet conditions.
These winches are designed specifically for boat and watercraft trailers per the owners manual. They are not rated for general utility trailer use.
This model features a 4:1 gear ratio, which provides a smooth and efficient mechanical advantage for pulling heavy loads.
