Seals leaks and wraps repairs without adhesive, glue, or sticky residue.
Self fusing silicone bonds to itself around hoses, pipes, fittings, wires, tools, and grips.
Creates a water tight and air tight seal rated to 900 PSI.
Handles temperature extremes from minus 60 degrees F to 500 degrees F.
Choose black, clear, or white in 15 foot or 40 foot rolls for the kit you are building.
More Details
Available colors: black, clear, and white.
Available roll lengths: 15 feet and 40 feet.
Roll width is 1 inch.
Material is 100 percent silicone rubber.
Self fusing design bonds to itself and leaves no adhesive residue.
Creates an airtight seal rated at 900 PSI pressure.
Temperature range is negative 60 degrees F to 500 degrees F.
Bond begins at 60 seconds and is permanent at 2 minutes when stretched and wrapped with 50 percent overlap.
Description
Silicone Tape is the repair roll to keep onboard, in the truck, and in the garage when a leak or wrap cannot wait. It fuses to itself instead of using adhesive, forming a tight wrap that removes without gummy residue on the surface underneath.
Use it for hose leaks, pipe repairs, fittings, wire protection, coax ends, tool grips, and temporary field fixes around the boat, RV, car, or home. It is rated to 900 PSI and handles temperatures from minus 60 degrees F to 500 degrees F.
Our Shipping Rates and Speeds
All orders under $60 ship for $6.99
Orders over $60 ship for FREE
You can expect to receive your items in 3 to 7 days in almost all scenarios
90% of orders arrive in 4 days or less
Try our silicone repair tape risk free for 30 days. If you are not satisfied, get a full refund.
This tape only bonds to itself, so it must be wrapped around the item being repaired. Stretch the tape as you wrap, overlapping each layer as you go. The tighter the tape is stretched and wrapped, the faster and stronger the bond will be. For hose repairs, overlap each wrap by about 50% to create an air and watertight seal. Tape is repositionable for about one minute after application and forms a permanent bond after about two minutes.
Seal Leaks Fast
Self fusing silicone wraps hoses pipes lines and fittings
No Sticky Mess
Bonds to itself without leaving adhesive residue behind
Waterproof Barrier
Creates a flexible airtight seal for wet marine repairs
Ready For Heat
Resists heat moisture weather and corrosion in harsh conditions
Customer Reviews
Frequently Asked Questions
No. This non-adhesive silicone tape bonds only to itself, so it can be cut away cleanly without leaving sticky residue.
Yes, this heavy-duty silicone is designed to withstand extreme cold as well as high temperatures.
Absolutely. It creates a watertight and airtight seal that is perfect for emergency hose and pipe repairs.
Not at all. One of the best features of this tape is that it works perfectly on wet, dirty, or oily surfaces because it only needs to touch itself to bond.
Yes, it is UV resistant and corrosion resistant, ensuring the seal won't become brittle or degrade even in harsh saltwater environments.
Yes, because it only sticks to itself, you can apply it to wet pipes or hoses to stop active leaks instantly.
White Silicone Tape: You have 1 minute to reposition the tape once it is placed, and the permanent seal forms after 2 minutes. 15 FT White Silicone Tape (); 15 FT Clear Silicone Tape: Once placed, you have 1 minute to reposition the tape before the seal begins to set, and it becomes permanent after 2 minutes. 15 FT Black Silicone Tape: Once placed, you have 1 minute to reposition the tape, and it forms a permanent bond after just 2 minutes.
Yes, it creates a flexible, waterproof, and airtight seal that is ideal for insulating electrical connections and wiring harnesses.
No, simply cut the tape with a knife or scissors; it will peel away cleanly without leaving any sticky residue behind.
Stretching the silicone activates the self-fusing process; the more you stretch it, the tighter and stronger the bond becomes. Stretching the tape as you wrap is critical because the more you stretch it, the stronger and more secure the bond will be. Stretching the tape as you wrap activates the self-fusing properties; the more you stretch it, the stronger and more secure the seal becomes.
Yes, it is ideal for insulating electrical wiring, sealing connections, and protecting wiring harnesses from moisture and air.
