Boat Winterizing Guide

BETTER BOAT

Boat Winterizing Guide

Fuel, engine and water systems, by engine type. Pick your engine, check items off as you go, and let your engine manual decide the steps and the order.

What powers your boat?

Your checks save in this browser on this device.

Check your engine manual first. Engines differ, and so do their winterizing procedures. Get the steps from your owner's manual or dealer and do them in that order. This guide is a reminder list, not a substitute. If you are not sure, have a qualified marine technician do the job.
Why it matters: water expands about 9% when it freezes, and BoatUS puts the force in the tens of thousands of psi. In ten years of BoatUS freeze claim files, more than three quarters were cracked engine blocks or exhaust manifolds. Warm climates are not exempt: many southern claims were boats that were never winterized, or relied on a heater that lost power.

1. Fuel

Gasoline enginesDiesel owners: follow the engine maker's fuel storage guidance.

2. Outboards

Outboards are designed to drain their cooling water when tilted all the way down. Typical items your manual will cover:

Water on first. Never start an outboard without a water supply. Even a few seconds running dry can damage the water pump impeller.
Optional gear:

3. Sterndrives (I/O)

A sterndrive has two jobs: the engine's raw water side and the outdrive. Typical items your manual will cover:

Optional gear:
  • Boat and RV Winterizing Kit: a gravity flow setup with a 5 gallon antifreeze tank, T connector, valves, clear reinforced hose and fittings. Check fit first. It is for engines with the raw water pump mounted inside the outdrive, using the muff type flushing method. It is not suitable for front engine mounted raw water pump systems and must not be connected to raw water pump suction. Antifreeze, motor muffs and any pump adapter are sold separately. Not sure where your pump is? Check your manual or ask your dealer before buying.
  • Outboard Motor Water Muffs: double sided flushing muffs for compatible outboard and I/O engines.

4. Inboards

Inboards pull raw water through the engine, and BoatUS prefers circulating antifreeze for them. Typical items your manual will cover:

Engine mounted raw water pump? The Better Boat Winterizing Kit is not suitable for that setup.

5. Water systems

Right antifreeze only. Use propylene glycol winterizing antifreeze made for marine and RV water systems (usually pink). Automotive coolant is usually ethylene glycol, which BoatUS calls effective but highly toxic. It never goes in freshwater plumbing or the raw water side. Buy enough of the right kind before you start.

6. Cabin and compartments

Optional gear:

7. Final checks

Sources and manufacturer instructions

General guidance only. Your owner's manuals and engine manufacturer's instructions come first. Better Boat