How To Deep Clean An Aluminum Jon Boat

Quick Answer

Start by rinsing the hull with fresh water to remove loose debris. Apply a dedicated aluminum cleaner or a mix of water and white vinegar to tackle oxidation, staining, and grime. Scrub with a stiff nylon brush, working in sections. Rinse thoroughly and dry to prevent water spots. For stubborn oxidation, use a marine aluminum polish. Protect the cleaned surface with a coat of aluminum wax. Keep dock contact damage minimal by using quality boat dock bumpers to protect the hull between cleanings.

In this video Buck Creek Tv goes over how to deep clean an aluminum jon boat from bow to stern using the Exterior Cleaning Kit and No Slip Boat Deck Cleaner. Check it out to see the before and after.

View Boat Exterior Cleaning Kit Product Page

View No Slip Boat Deck Cleaner Product Page

Better Boat Exterior Cleaning Kit for boats and watercraft

Featured in this video

Boat Exterior Cleaning Kit

Build a complete washdown setup in one box instead of piecing together soap, towels, sponge, eraser, and sprayer separately.

Better Boat Boat Exterior Cleaning Kit product image

Everything you need in one box

Boat Exterior Cleaning Kit

The Boat Exterior Cleaning Kit bundles soap, towels, sponge, eraser, and sprayer so you can start a full washdown without sourcing each piece separately. It is the core setup this section walks you through.

View Boat Exterior Cleaning Kit
Better Boat No Slip Boat Deck Cleaner for boats and aluminum hulls

Featured in this video

No Slip Boat Deck Cleaner

Break up stubborn buildup on boats, aluminum hulls, and more before it dulls the finish.

No Slip Boat Deck Cleaner

Break up stubborn hull buildup

No Slip Boat Deck Cleaner

No Slip Boat Deck Cleaner cuts through tough buildup on aluminum hulls before it dulls the finish, making it the direct tool this section covers.

View No Slip Boat Deck Cleaner

Ready to deep clean your boat? The Boat Exterior Cleaning Kit and No Slip Boat Deck Cleaner are available at betterboat.com.